How to Fit Twist Fit Roller Blinds
This handy guide whisks you through fitting twist fit roller blinds like a pro – no DIY degree required! Whether you're a seasoned fixer or a total newbie, we'll have your windows transformed from bare to beautiful in just a few breezy steps. Unleash your inner decorator, and let's roll!
How to Fit Twist Fit Roller Blinds - Step by Step
-
Step 1
Angle the blind and insert it into the recess, then push the tightener against the wall
-
Step 2
Raise the control end of the blind to achieve a level position and release the pressure. The blind will hold itself in place.
-
Step 3
Secure the blind firmly and rotate the tightening wheel to ensure a tight fit. If the tightener is positioned on the left side, turn it towards you; if it’s on the right, turn it away from you.
-
Step 3: Top Tip!
Ensure the wheel is tightened to its maximum extent to maintain the blind’s security and prevent slippage. If you encounter the ‘foot’ of the mechanism spinning while tightening, remove the blind from the window, tighten it slightly, reinsert it, and attempt the process again.
-
Child Safety
Our twist fit roller blinds are designed to be child safe with an easy break chain connector to prevent choking and strangulation for kids.
-
Warning
Young children can be strangled by loops in pull cords, chains, tapes and inner cords that operate the product.
Young children can be strangled by loops in pull cords, chains, tapes and inner cords that operate the product. To avoid strangulation and entanglement, keep cords out of reach of young children. Cords may become wrapped around a child’s neck. Move beds, cots and furniture away from window covering cords. Do not tie cord together. Make sure cords do not twist and create a loop