Step 1
Measure the Width
Measure the width of your window recess in three places (top, middle and bottom). Use the smallest measurement as your width.
Step 2
Measure the Drop
Measure the drop of your window recess in 3 places (top, middle and bottom). Use the smallest measurement as your drop.
Step 3
Enter your Measurements
Go to your chosen product on our site, enter your width and drop measurements and follow the remaining steps to customise your twist fit roller blind.
Important Checks
Check your recess depth
Ensure you have at least 5cm clearance between the edge of any obstruction and the front of your window recess.
Width obstruction check
If you have any obstruction within your recess such as tiles, measure between these two points and use this as your width measurement. If the difference between this measurement and the top of your recess is less than 25mm you can use the measurement at the top of your recess